Universal Testing Machines

Our range of Computerized Universal Testing Machines having model 'UTE' series. Control panel can be hooked to any PC using RS-232 communication port. Offering exhaustive application this machine is aided with window based software packages with real time graph on PC which enables the user for effective evaluation of different parameters.

Features:

• Real time graph, user friendly Windows base software
• Extensive graphics on screen for curve plotting, magnification and zooming
• Software features includes Graph comparison, point tracing facility
• Different units selection for load & displacement, Mean deviation, frequency distribution, Skew dig., Histogram
• Calculates maximum value, min. value, mean value, variance, and standard deviation (Other statistical parameters on request)
• Selectable batch & statistical printouts
• Loading accuracy as high as + 1 %
• Straining at variable speeds to suit a wide range of materials
• Motor driven threaded Columns for quick effortless adjustment of middle cross-head to facilitate rapid fixing of test specimen
• Simplicity in reading because of digital readouts
• Wide range of standard and special accessories, including load stabilizer
• Easy change from plain to threaded and screwed specimens
• Large effective clearance between columns enables testing of standard specimens as well as structures
• Simple controls for ease of operation
• Robust straining frame of an extremely rigid construction
• Safe operation ensured by means of safety devices
• Fully enclosed and protected pressure transducer
• Optional serial port to transfer data to computer for analysis/storage evaluation

Applications:

• FIE Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.

Principal Operation:

• Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces
• Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the auto graphic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen

• All Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991

• Loading Accuracy as high as + 1%
• Straining at variable speeds to suit a wide range of materials
• Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials
• Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen
• High reading accuracy due to large size and design of dial
• Wide range of standard and special accessories, including load stabilizer
• Easy change from plain to threaded and screwed specimens
• Large effective clearance between columns enables testing of standards specimens as well as structures
• Simple controls for easy operation
• Robust staining frame of an extremely rigid construction
• Safe operation ensured be means of safety devices
• Fully enclosed and protected pendulum

Application:

• FIE Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted

Principal Operation:

• Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces
• Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The cylinder of the dynamometer is also of self-lubricating design. The load transmitted to the cylinder of the dynamometer is transferred through a lever system to a pendulum. Displacement of the pendulum actuates the rack and pinion mechanism which operates the load indicator pointer and the autographic recorder. The deflection of the pendulum represent the absolute load applied on the test specimen. Return movement of the pendulum is effectively damped to absorb energy in the event of sudden breakage of a specimen

Accuracy and Calibration:

• AII Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991
• FIE Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading