Heat Treatment Sales & Services
Odhav, Ahmedabad, Gujarat
Send E-mail
Send SMS
Home»Products & Services»

Novotest NDT

Novotest is the company who develops and manufactures instruments for non-destructive quality control. Currently they produce instruments for measuring a wide range of parameters and quality control of the majority of products: hardness of the metal of various principles of action, thickness of coatings, ultrasonic flaw detectors, ultrasonic thickness gauges, magnetometers, instruments for monitoring the quality of construction materials, equipment environmental control and many other devices.
 
All devices are designed and manufactured by our company have its own name – Novotest. Developing and manufacturing equipment, we are guided first and foremost the wishes of our customers regarding the accuracy, functionality, ergonomics and performance of new devices. That’s why use of devices Novotest very easy and convenient. Taking into account the wishes of our customers, we certainly take into account the fact that the cost of the device should be minimal, with the maximum possible set of service and operational advantage.

REQUEST CALLBACK
  • UCI & Leeb Combiened Hardness Tester
  • UCI & Leeb Combiened Hardness Tester
  • UCI & Leeb Combiened Hardness Tester
Get Best Quote

Approx. Rs 1.75 Lakh  / Piece(s) Get Latest Price

Combined Hardness Tester NOVOTEST T-UD3

The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from portable hardness tester.

UCI method for the hardness testing: The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.

Leeb method for the hardness testing:
Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.

Hardness tester allows user to measure the hardness at extremely low temperatures. The real tests has been carried out at a temperature of 25°C below zero. The device is operated very easy, the measurement accuracy did not exceed the value according to standards, keyboard and display of the device allowed user to operate confidently – the difference between the operating at the indoor temperature and operating at the extreme cold was not noticeable at all!

We have the CE certificate of conformity for Portable Combined Hardness Tester NOVOTEST T-UD3.

Advantages
  • Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
  • Measuring the hardness of the surface hardened layer
  • Wide range of hardness testing
  • Various measurement modes
  • 88 combinations of materials and hardness scales (calibrations)
  • Calibration of any scale in any range
  • Convenience and ease of measurement
  • Optimized number of buttons
  • Large full color graphic display with bright backlighting
  • Photofixing of measuring samples
  • Automatic recognition of probe
  • Indication of the type of connected probe
  • Calibrations stored in memory of UCI probe
  • Extended temperature range (frost, down to – 40°C)
  • Internal memory and communication with PC
  • New intuitive menu with tips on the buttons
  • Optional wireless mini printer
  • Water resistant case
  • Rubber bumper protected case
  • Internal clock
  • Measure hardness value of any mass products with a thickness more than 1 mm (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)

Specifications:
UCI probe types: 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
Leeb probe types: D, DC, DL, C, D+15, E, G
Measuring range: HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
Measuring accuracy: HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
Indenter: Diamond indenter (UCI), Hardened ball (Leeb)
Measuring direction Any direction 360°
Data storage: Limited only by the memory card
Hardness scale: RC, HB, HV, HRB, HS, HL, MPa
Indication: Color LCD display (320×240)
Operating environment Temperature:-20°C~40°C; Humidity: 30%~80%R.H.
Power supply DC 4,5V (3 pcs batteries AA)
Instrument dimensions 160x75x30mm
Battery life Approx. 10 hours

Additional Information:
  • Item Code: T-UD3
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.8 Lakh  / Piece Get Latest Price

Ultrasonic Flaw Detector NOVOTEST UD2301Ultrasonic flaw detector UD2301 is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures.
Flaw detector allows user to detect various defects such as discontinuities, cracks and heterogeneity of materials in semi-finished products and welded joints, to measure the depth and coordinates of defects, the thickness of products, the speed of propagation and attenuation of ultrasonic vibrations (UT) in the material.
Ultrasonic Flaw detector is produced in small housing with optimal size for performing testing in tight spaces. Device has color display with high resolution 320*480 pixels, which significantly improves the usability of the device.

Specification:

Operating frequency rangefrom 1 to 10,0 MHz
Range of measured time intervals (duration of scanning)from 6 to 1000 µs
Velocity range1000 – 9999 m / s
Error of measurement of time intervalsnot exceed ± 0,025 µs
Maximum permissible error of measurement of the amplitudes of the signals at the receiver input in the range from 0 to 110 dBnot exceed ± 0,5 dB
Testing gain range125 dB
Averaging over the quantity of startsfrom 1 to 16
Range of variation of temporal sensitivity adjustment (TVG)40 dB
Number of control points TVG15
Duration of the excitation pulse to the loadfrom 0,0 to 0,5 µs
Amplitude of the excitation pulse to the 50 Ohm load, not less100, 200, 300
Operating frequency range of the receiver on the level -3 dBfrom 1 to 10 MHz
Deviation of the amplitudes of input signals in the range from 10 to 100% of the screen height not more than1 dB
Scanningfrom 1 to 1000 µs
Delay of scanningfrom 0 to 2000 µs
Range of measurement of time intervalsfrom 0 to 1000 µs
Setting a delay in the prism of the probefrom 0 to 15 µs
Automatic signaling of defects (AFS)dual-gate
Setting range of AFS gatesfrom 0 to 2000 µs
Adjusting thresholds of AFS gatesfrom 0 to 100 % of screen height
Detection of signalspositive half-wave, radio mode
Dimensions (W*H*L)80*162*38 mm
Weight, not more250 g (without batteries)
Mean time between failuresnot less than – 3000 hours
Advantages:

Display of the device can be operated in any orientation – there are 4 options of display rotation, that allows user to customize the unit by himself, both for lefties and righties users. Instrument could be operated in both portrait and landscape orientations. Appointment of the ultrasonic flaw detector:

= to test the quality of welds and base metal of products;
= to detect corrosion, cracks, delaminations and other internal defects;
= to determine coordinates and parameter estimation of defects such as discontinuity, cracks and uniformity of material
in products from metal, plastic, composites and other materials;
= to measure the thickness of products.

Flaw detector is equipped with 3 standard type AA rechargeable batteries. The device can also operate from simple batteries the same type. Using the batteries of standard type allows autonomous operation of the device in almost any conditions

Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.25 Lakh  / Piece(s) Get Latest Price

Combined Hardness Tester NOVOTEST T-UD2

Combined Hardness Tester NOVOTEST T-UD2 is designed for rapid non-destructive hardness testing of :

metals and alloys on standardized hardness scales;
metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with additional scales for calibration;
use the scale of tensile strength (Rm) for determining the tensile strength of carbon steel products pearlitic by automatically converting from Brinell (HB) hardness scale.

Device implements 2 methods of testing: rebound (Leeb) and ultrasonic contact impedance (UCI). The combination of both methods allows user to test all range of metal products.

Advantage:

2 removable probes: ultrasonic contact impedance (UCI) and dynamic, rebound (Leeb)

There are no restrictions for hardness testing (by weight, configuration, structure, degree of mechanical and thermal treatment, etc.)

To evaluate changes in the hardness of the hardened layer depth articles and the effect of surface stress

Wide range of hardness value

Convenience and ease in operation

Minimum number of imprints

Graphical display with backlight

Automatic recognition of probe

Control of the batteries

Extended temperature range (cold-resistant, down to -20 °C)

Device has internal memory and allows user to connect with PC

New, intuitive menu with tips on the buttons


Specifications:
UCI probe types1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, , 10kgf (98N) 22lbfLeeb probe typesD, DC, DL, C, D+15, E, GIndenter

Diamond Indenter (UCI)

Hardened ball (Leeb)

Hardness scaleHRC, HB, HV, MPaMeasurement hardness range:

Rockwell, HRC

Brinell, HB

Vickers, HV

temporary resistance (tensile strength), MPa

20 – 70

90 – 450

230 – 940

370 – 1740

Measuring accuracy

HV+ / – 3%

HRC+ / – 1,5%

HB+ / – 3%

Measuring directionAny direction 360°Materials

UCI probe – pre-calibrated for steel.

Leeb probe – pre-calibrated for steel, alloy steel, cast iron, stainless steel, aluminum, bronze, brass, copper.

Additional custom materials for calibration.

Operating temperature range, ° C-20 … +40Power supply2 AA batteriesDimensions, mm120x60x25Weight of electronic unit with battery, no more, kg0.2Batteries life, not less, h20


Additional Information:
  • Item Code: T-UD2
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.30 Lakh  / Piece(s) Get Latest Price

UCI Hardness Tester NOVOTEST T-U3

The Ultrasonic Contact Impedance (UCI) probe is used for measuring the hardness value of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.
Built-in camera allows user to take a picture of testing object and mark tested area with corresponding hardness value.
UCI Hardness Tester NOVOTEST T-U3 has the sealed housing with rubber protective strips, it is ideal for use in workshop and field conditions with high humidity, dust, etc. Hardness tester has frost-resistant display, which allows user to use the device at any season and in any climatic zone of the Earth.
The device has PC software with a comfortable and intuitive interface.

Specification:

UCI probe types1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
Measuring range (with standard calibration)HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
Measuring accuracyHV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
IndenterDiamond indenter (UCI)
Measuring directionAny direction 360°
Data storageLimited only by the memory card
CommunicationUpload data to PC and export as a spreadsheet (USB cable and software included )
Hardness scaleHRC, HB, HV, HRB, HS, HL, MPa
MaterialsPre-calibrated for steel, has calibration scales for additional custom materials
Data displayLoad applied/contact (UCI), Single test result, Max, Min, Average of tests, Number of tests, Deviation, Var. coeff, Histogram, Signal and Smart Mode (Filter of incorrect measurements)
IndicationColor LCD display (320×240)
Operating environmentTemperature:-20°C~40°C; Humidity: 30%~80%R.H.
Power supplyDC 4,5V (3 pcs batteries AA)
Instrument dimensions160x75x30mm
Net weightApprox. 0.3kg (without probe)
Batteries lifeApprox. 10 hours

Advantage:
= Hardness measurement of any mass products with a thickness more than 1 mm
= Measuring the hardness of the surface hardened layer
= Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
= Wide range of hardness testing
= Various measurement modes
= Calibration of any scale in any range
= Convenience and ease for measurement
= Optimized number of buttons
= Large full color graphic display with bright back-lighting
= Calibrations stored in memory of probe
= Extended temperature range (frost, down to – 40°C)
= Internal memory and communication with PC
= New, intuitive menu with tips on the buttons
= Optional wireless mini printer
= Water resistant case
= Has different operating modes:
Graph – the mode of building of graph
Histogram – the mode of building of histogram
Statistics – the mode of statistic
Smart – the mode of filtering of incorrect measurement

Additional Information:
  • Item Code: T-U3
Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 45,000.00  / Piece Get Latest Price

Ultrasonic Thickness Gauge NOVOTEST UT-1

Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive thickness testing of:

  • products made of various metals, alloys and other materials;
  • glass, plastic, composite and other products from non-metallic materials;
  • the walls of the tanks, pipes, casing parts, sheets, overhead, and other structures, including the corroded surfaces, pitted, with scum, etc.;
  • products during their production and operation;
  • metal products for diagnostic and expert work with one-side access to the tested object.
Ultrasonic method for measuring thickness
Ultrasonic Thickness Gauge NOVOTEST UT-1 operates on the principle of measuring the propagation time of ultrasound in the product. The pulse generator produces a high frequency electrical pulses that excite the piezoelectric transducer (Probe). At the same transducer are converted electrical signals into the elastic (mechanical) vibrations – sound waves. These waves propagate from the surface of the input to the reflective (bottom) surface, re-taken and converted into electrical signal by means of PET. After that device calculates the thickness of tested object.

Specification
Measuring thicknesses range (depends on probe type), mm0.8 … 300
Setting range of the ultrasonic velocity, m / s1000-9999
Discrete readings on the digital indicator, mm0.1
Response time, with no more than2
Basic measurement accuracy, mm± (0,001 T+/- 0.1)
Overall dimensions, mm120x60x25
Operating temperature range, ° C-5 to +40
Power supply2 AAA batteries
Time of continuous work hours, not less, h10
Weight of electronic unit with battery, no more, kg0.2

Advantages
  • Wide range of measuring thicknesses
  • Convenience and ease in operation
  • Minimum number of controls
  • Select the type of probe through single button
  • Preset velocity of ultrasound
  • Graphical display with backlight
  • Compensation of probe delay
  • Control of the batteries
  • Mapping the presence of acoustic coupling on the graphic display
  • Fixation of the last measurement result in the removal of the transducer surface


Yes! I am Interested
REQUEST CALLBACK
Get Best Quote

Approx. Rs 1.2 Lakh  / Set(s) Get Latest Price

LEEB HARDNESS TESTER NOVOTEST T-D3

Dynamic (Leeb) probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.
Built-in camera allows user to take a picture of tested object and mark tested area with corresponding hardness value.
Hardness Testers NOVOTEST T-D3 has sealed housing with rubber protective bumper, it is ideal for use in workshop and field conditions with high humidity, dust, etc. Hardness tester has frost-resistant display that allows user to use the device at any seasons and in any climatic zones of the Earth.

Leeb method for the hardness testing

Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc. Hardness tester T-UD3 also use a dynamic method of the hardness measuring – Leeb method, which is standardized according to ASTM A596. This method allows user to measure very fast and easy: install the probe, press on the probe to recharge spring, press the button on the top of the probe to make test and after that save the results of the hardness value, which are showed on the display of the device. This method is used for measuring the hardness value of non-ferrous metals, cast iron, coarse-grained materials, massive products etc. (with weigh more than 5 kg or thicker than 10 mm) also this method perfectly complements the UCI method of hardness measuring. Hardness tester T-UD3 makes automatic calculation of the hardness of a wide range of materials – steel, stainless steel, cast iron, bronze, aluminum, so that we can say that combined hardness testers is the most universal, which is needn’t in recalibration, and fully ready for operation after “getting out of the box”.

Advantages
• Large full color graphic display with bright backlighting
• Various measurement modes: statistic, graph, histogram, smart, signal
• Calibration of any scale in any range
• Convenience and ease of measurement
• Optimized number of buttons
• 88 combinations of materials and hardness scales (calibrations)
• Photofixation of tested objects
• Extended temperature range (frost, down to – 40°C)
• Internal memory and communication with PC
• New, intuitive menu with tips on the buttons
• Optional wireless mini printer
• Water resistant case
• Rubber protected bumper

Additional Information:
  • Minimum Order Quantity: 1 Set(s)
Yes! I am Interested
Save time! Get the Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Portable Coating Thickness Gauge NOVOTEST TP-1 – device for operative non-destructive testing of coating thickness in accordance with standard ISO 2808 with high measurement accuracy.
Coating thickness gauge is designed to test:
  • thickness of various thick protective coatings on various metals and alloys;
  • thickness of paint and other dielectrics – radioabsorbing, mastic, teflon, plastic, electroplating coatings on steel;
  • thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals;
  • thickness of bitumen and other thick coatings on various metals and alloys;
  • as well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness
Electronic thickness gauge – device which widely used in shipbuilding and automotive industries for measuring the thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects.

Advantages
  • Large thickness measurement range
  • Convenience and ease in operation
  • Minimum number of controls: one button – one function
  • Graphical display with backlight
  • Automatic recognition of probe
  • Indication of the connected probe type
  • Control of batteries
Yes! I am Interested
X
 

Download Brochure
Explore more products
Heat Treatment Sales & Services

Bharat Shah
L/119, G. I. D. C. Industrial Estate Opposite Odhav Fire Station, Odhav
Ahmedabad - 382415
Gujarat, India
Send Email
© Heat Treatment Sales & Services. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited